Industrial Servo Motor SGMAS-04ACA2C Yaskawa Electric Motors-AC Servo 400W
- Power : 0.4KW
- Options : Withiut Brake
- AC Servo Motor
- SGMAS Sigma II
- Yaskawa Electric
|Place of Origin||Japan|
|ENcoder Specifition||17-bit Incremental Encoder|
|Design Revision Order||A|
|Sharft End Specifition||Straight without key|
(a) Motor Frame
Always connect servomotor frame terminal FG to the SERVOPACK ground
terminal . Also be sure to ground the ground terminal .
If the servomotor is grounded via the machine, a switching noise
current will flow from the SERVOPACK power unit through motor stray
capacitance. The above grounding is required to prevent the adverse
effects of switching noise.
(b) SynqNet Communication Cable
Make sure to keep the box or power line separate from the SynqNet
communication cable because the cable is easily influenced by
If noise is a problem, coil the communication cable two turns
around the ferrite cores on the SERVOPACK end and the controller
end. Refer to the following diagram.
(c) Noise on the Reference Input Line
If the reference input line receives noise, ground the 0 V line
(SG) of the reference input line. If the main circuit wiring for
the motor is accommodated in a metal conduit, ground the conduit
and its junction box. For all grounding, ground at one point only.
All grounds must be made to only one point in the system.
Using Noise Filters
Use an inhibit type noise filter to prevent noise from the power
supply line. The following table lists recommended noise filters
for each SERVOPACK model.
Install a noise filter on the power supply line for peripheral
equipment as necessary.
OTHER SUPERIOR PRODUCTS
|Yasakawa Motor, Driver SG-||Mitsubishi Motor HC-,HA-|
|Westinghouse Modules 1C-,5X-||Emerson VE-,KJ-|
|Honeywell TC-,TK-||GE Modules IC -|
|Fanuc motor A0-||Yokogawa transmitter EJA-|
Contact person: Anna